SPT 2102-TiO2 Manual de Utilização e Manutenção descarregar pdf (Página 4)

OPERATION

Connect the plug to a 120V power outlet and the air cleaner will be on “stand by”

status.

Control Panel:

1. Press the button to turn on the air cleaner. To turn off the air cleaner,

press the button again.

2. Press the button to select the fan speeds: LOW, MED (medium), HI (high),

Turbo and Auto.

Note: When the “Auto” mode is selected, it takes three minutes for the air

sensor to warm up. During the warming up, the indicator light flashes. Three

minutes later, the indicator light stops flashing and the gas sensor starts

functioning. The air sensor will detect the air quality and switch the fan

speeds automatically.

3. When the air cleaner is running, press the button to set up the “off” timer.

The timer can be set from one to eight hours. Every indicator light represents

one hour. When the set time is up, the air cleaner will turn off automatically.

4. Press the button to turn on the UV light function.

5. Hold this button till the indicator light is off to reset the filter replacement

reminder.

6. At “stand by” status, press the button to set the “on” timer. The timer

can be set from one to eight hours. Every indicator light represents one hour.

When the set time is up, the air cleaner will turn on automatically. Note: the

air cleaner will turn on at the LOW fan speed only.

1 2 3 4 5 6 7 8

Sem comentários

SPT 2102-TiO2 Manual de Utilização e Manutenção Página 4